Go to footer

GRH 101 Airborne forum rekonstrukcji amerykańskich jednostek powietrznodesantowych


Nieśmiertelniki

Oporządzenie i wyposażenie (szelki, pasy, ładownice, hełmy, rękawice, łopatki, kilofki, musset bagi, duffle bagi, menażki, manierki itp.). Tu również o dodatkach, jak pudełka na zapałki itp.

Moderatorzy: Mako, Jackson


Re: Nieśmiertelniki

Postprzez Baniak » Pt paź 01, 2010 10:34 am

ScreamingEagle napisał(a):Dlaczego na 2 wojennych nieśmiertelnikach są wycięcia ? :)


https://www.armydogtags.com/a_PurposeNotch.php

There are many misconceptions about the notch in dog tags. Dog tags were used widely during WWII and are still used today, but they no longer have a notch in them. If the tag has a notch, it is simply for fashion and historical accuracy.

Appearance
In older dog tags, especially those used during WWII, there is usually a small, wedge-shaped notch in the lower left-hand side. Modern military dog tags do not have a notch.

War Use
One popular misconception about the notch in dog tags is that it was meant for shoving the tag between the dead soldier's teeth. This was not the purpose of the dog tag, but it probably happened in some cases.

Stamping Misconception
Some people think that the notch was originally meant to line up in the Graphotype dog tag stamping machine. This theory has never been proved.

True Purpose
The Addressograph was a type of machine developed and used during World War II. The tag was placed in the Addressograph machine and aligned along the notch. The tag was placed face down and then stamped onto a piece of paper via carbon ribbon in order to transfer the soldier's information.

Źródło:
http://www.answerbag.com/q_view/1936888
Avatar użytkownika
Baniak
zarejestrowani
 
Posty: 2177
Dołączył(a): Pn cze 02, 2008 8:10 pm
Lokalizacja: GRH Five-O-Deuce http://502-101airborne.pl, ok. Warszawy


Re: Nieśmiertelniki

Postprzez Jackson » Pt paź 01, 2010 12:48 pm

Był dobry artykuł o tym na stronie WWII Combat Medic ale niestety chyba ją zwinęli, za to znalazłem coś takiego:
http://med-dept.com/addressograph_m70.php
Avatar użytkownika
Jackson
101st
101st
 
Posty: 3043
Dołączył(a): Pt mar 14, 2008 2:39 am
Lokalizacja: Warszawa


Re: Nieśmiertelniki

Postprzez Mako » Pt paź 01, 2010 3:38 pm

Baniak napisał(a):War Use
One popular misconception about the notch in dog tags is that it was meant for shoving the tag between the dead soldier's teeth. This was not the purpose of the dog tag, but it probably happened in some cases.
Coś takiego zostało pokazane w filmie "W księżycową jasną noc" (Midnight Clear).
Avatar użytkownika
Mako
101st
101st
 
Posty: 3314
Dołączył(a): Śr mar 15, 2006 8:27 pm
Lokalizacja: Warszawa


Re: Nieśmiertelniki

Postprzez ScreamingEagle » Śr paź 06, 2010 9:09 am

To wycięcie było po to żeby dla martwego żołnierza wsadzić między zęby nieśmiertelnik ? :D Oglądałem ten film W księżycową jasną noc :)
Avatar użytkownika
ScreamingEagle
zarejestrowani
 
Posty: 63
Dołączył(a): Pt lip 30, 2010 7:22 am
Lokalizacja: Białystok


Re: Nieśmiertelniki

Postprzez Mako » Śr paź 06, 2010 9:26 am

ScreamingEagle napisał(a):To wycięcie było po to żeby dla martwego żołnierza wsadzić między zęby nieśmiertelnik ? :D
Zgodnie z tym co zamieścił Baniak:
Baniak napisał(a):War Use
One popular misconception about the notch in dog tags is that it was meant for shoving the tag between the dead soldier's teeth. This was not the purpose of the dog tag, but it probably happened in some cases.
Co oznacza, że umieszczanie ich między zębami jest błędną koncepcją, ale niewykluczone, że czasami nie było tak robione.
Prawdziwy powód:
Baniak napisał(a):True Purpose
The Addressograph was a type of machine developed and used during World War II. The tag was placed in the Addressograph machine and aligned along the notch. The tag was placed face down and then stamped onto a piece of paper via carbon ribbon in order to transfer the soldier's information.
Avatar użytkownika
Mako
101st
101st
 
Posty: 3314
Dołączył(a): Śr mar 15, 2006 8:27 pm
Lokalizacja: Warszawa


Re: Nieśmiertelniki

Postprzez knightrider » Cz kwi 21, 2011 9:17 am

Przeczytałem całość i nadal nie jestem pewien, który wzór najbardziej pasuje na 506 pułk z Taccoa.
Mugłby mi ktoś jasno to wyjaśnić.
knightrider
zarejestrowani
 
Posty: 49
Dołączył(a): Cz gru 02, 2010 7:05 pm

Poprzednia strona

Powrót do Strona główna forum

Powrót do US Wyposażenie

Kto przegląda forum

Użytkownicy przeglądający to forum: Brak zalogowanych użytkowników i 24 gości